| No. | Brand | E | A | N | U | f | T | a | K |
| 1213 | NSK | - | - | - | - | - | - | - | - |
| 17x40x12 | - | - | - | - | - | - | - | - | - |
| 10W | INA | - | - | - | - | - | - | - | - |
| 20.5% | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 7318BEGMP | - | - | - | - | - | - | - | - | - |
| mdd112d-n-030-n2m-130gb0 | Rexroth | - | - | - | - | - | - | - | - |
| NU409-M1-C3 | fag | - | - | - | - | - | 280 mm | - | - |
| ip65 | - | - | - | - | - | - | - | - | - |
| 4-Way | - | - | - | - | - | - | - | - | - |
| 2007-2008 | NSK | - | - | - | - | - | - | - | - |
| 4X8 | - | - | - | - | - | - | - | - | - |
| IP66 | - | - | - | - | - | - | - | - | - |
| 650 | NTN | - | - | - | - | - | - | - | - |
| PE-SB-4744 | - | - | - | - | - | - | - | - | - |
| PE400 | - | - | - | - | - | - | - | - | - |
| LS650 | - | - | - | - | - | - | - | - | - |
| 1144003830 | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 84878-61-5 | - | - | - | - | - | - | - | - | - |
| (6x12x4mm) | - | - | - | - | - | - | - | - | - |
| 12-48 | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | - | - | - | - | - | - | - | - | - |
| 1 | INA | - | - | - | - | - | - | - | - |
| A11vlo190le2s | - | - | - | - | - | - | - | - | - |
| 214NP | FAFNIR | - | - | - | - | - | - | - | - |
| LFR5200ZZ U Groove Track Roller Bearing 10x32x14mm | bore type:Round; finish/coating:Uncoated; outer ring width:3/4 in; fillet radius:0.035 in; inner ring width:7/8 in; B:0.8750 in; cage material:Nylon; D:2.5625 in; series:7500; snap ring included:Without Snap Ring; |
| CCFH-3/4-SB Inch Size Stud Type Track Roller Bearing | overall length:41 mm; material specification:Cermet M; maximum v value:Dry 0.85;Period; maximum pv value:Dry 1.65, Periodic L; standards met:RoHS; D:33 mm; material:Sintered Material wi; maximum p value:10 N/mm2; operating temperature range:Dry -40 to +392; |
| KR16PP Track Roller Bearing | Fatigue load limit Pu:0.655 kN; d1 ≈:46.94 mm; da min.:42 mm; D:72 mm; Calculation factor kr:0.025; Basic dynamic load rating C:27 kN; d:35 mm; Reference speed:24000 r/min; Da max.:65 mm; Limiting speed:15000 r/min; |
| MCFR26SBX / MCFR-26-SBX Cam Follower Bearing 10x26x36mm | lubrication hole location:None; closure type:Sealed; operating temperature range:-30 to +225 &de; finish/coating:Zinc Plated, Chrome; axial static load capacity:33100; radial static load capacity:56400 lb; roller diameter:6.0000 in; d:2.2500 in; roller material:Steel; radial dynamic load capacity:35840 lb; |
| NUTR100180 Supporting Roller / Track Roller Bearing 100x180x65mm | material specification:JLON 7000; manufacturer catalog:Click here; overall length:1.0000 in; maximum pv value:40000; Weight:0.026 lb; maximum p value:1050; flange width:1/8 in; standards met:FDA; D:1.0000 in; inside diameter:0.6250 in; |
| MCF22AX / MCF-22A-X Cam Follower Bearing 10x22x36mm | compatible lock nut number:N-04; face diameter:1-1/8 in; tang width:0.166 in; material:Steel; series:W-00; tang thickness:0.032 in; outside diameter over tangs:1.531 in; number of tangs:11; |
| NFRE40 Track Roller Bearing / Cam Follower Bearing 16x40x60mm | inner ring width:30.18 mm; D:90 mm; series:RA-RR; snap ring included:Without Snap Ring; bore type:Round; maximum rpm:2500 RPM; cage material:Nylon; outer ring width:22 mm; B:1-3/16 in; finish/coating:Uncoated; |
| LR207-X-2RS Cam Follower Bearing / Track Roller Bearing 35x80x17mm | series:VFCB; B:6.1250 in; seal type:Single Lip Contact w; housing width:1.2344 in; finish/coating:Uncoated; bolt size:0.4375 in; inner ring width:2.0938 in; duty type:Medium Duty; manufacturer catalog:Click here; operating temperature range:250°; |
| T22 V Flat Groove Roller Wheel Pulley Ball Bearings 8*22.5*14.5mm | D1:77 mm; d1:100 mm; Grease:2 700 min-1; rs (min):1 mm; static Cor:136.000 kN; Oil:3 500 min-1; Pu:6.180 kN; d:75 mm; D:100 mm; H:19 mm; |
| MCF40SBX / MCF-40-SBX Cam Follower Bearing 18x40x58mm | rod hole diameter:41 mm; slot width:26 mm; overall height:167 mm; d:65 mm; seal type:Contact with Slinger; series:CUCT200CE; overall length:224 mm; dynamic load capacity:5850 kgf; lubrication type:Lubrication Fitting; unit type:Side Mount; |
| NUCF18-AB Cam Follower Bearing / NUCF18AB Track Roller Bearing 18x40x58mm | bore type:Round; radial dynamic load capacity:47447 lb; overall length:10.4375 in; base width:2.8125 in; d:2.7500 in; D:7.8125 to 8.4375 in; operating temperature range:Max 250°; overall height:6.4375 in; lubrication type:Lubrication Fitting; series:USRB 5000; |
| CR10-1R Stud Type Cam Follower Bearing 6.35x15.875x31.55mm | shaft centerline height:2-3/8 in; hub diameter:3-3/4 in; replacement bearing:UC207-22C4HR5; housing material:Cast Iron; radial dynamic load capacity:5820 lbf; horizontal bolt spacing:2 in; unit standoff:1-53/64 in; duty type:Standard Duty; vertical bolt spacing:1-1/4 in; lubrication type:Lubrication Fitting; |
| NA2210.2RS Yoke Track Roller Bearing 50x90x23mm | P90°:173 kN; P60°:290 kN; h:61.913 mm; P150°:94.3 kN; Housing:SAF 538; P120°:107 kN; J min.:549.275 mm; Eye bolt:2 x 1/2-13 UNC; H:401.637 mm; PG:1/4 NPT; |
| LR5306-2HRS Cam Follower / Track Roller Bearing 30x80x30.2mm | cage material:Steel; closure type:Open; needle bearing type:Machined Bearing wit; d:20 mm; operating temperature range:-20 to +120 &de; D:28 mm; maximum rpm:20000 RPM; lubrication hole type:Lubrication Groove &; B:23 mm; static load capacity:5700 lbf; |
Stud Type Track Roller Bearings - RBC Bearings
RBC Aerospace Bearings offers Mil Spec standards and many specialty and custom stud type airframe track rollers to the aerospace industry and all major OEM
Track-Roller Bearings | McMaster-Carr
Choose from our selection of track-roller bearings, including threaded track rollers, threaded V-groove track rollers, and more. In stock and ready to ship
PCI Track Rollers - PCI, ProCal Innovations LLC
PCI Track Roller assemblies are manufactured with radial ball bearings or tapered roller bearings and are engineered to last in the most demanding of
Cam Followers and Track Rollers - Bearings - Grainger
15 results - Cam followers and track rollers from Grainger can withstand a variety of mechanical applications. Choose from assorted cam follower types, including
Track Roller Bearings | Kilian Engineered Bearings and
Kilian Track Roller Bearings are specially designed to withstand heavy rolling or shock loads on track type and cam controlled equipment for automotive,
Track rollers
SKF supplies track rollers greased, sealed and ready-to-mount. They are available in ... cam rollers (yoke-type track rollers based on ball bearings, fig. 1, fig
Track Runner Bearings - Linear Bearings ...
Results 1 - 16 of 113 - Online shopping for Track Runner Bearings - Linear Bearings from a ... Koyo CR-10-1 Track Roller, Standard Stud, Unsealed/Slotted, Inch,
Track Rollers | Fastenal
Track rollers are made for heavy rolling and shock loads on track type and cam controlled equipment, including: ... ACCURATE BUSHING CO SMITH BEARING
NATV15LL/3AS Track Roller Bearing / Roller Followers 15x35x19mm Video