| No. | Brand | B | T | H | s | F | r | b | C |
| 5182A | - | 11.00 mm | - | - | - | - | - | - | - |
| 18mm | - | 17.00 mm | - | - | - | - | - | - | - |
| YH1-18221-11-0H | - | 23.00 mm | - | - | - | - | - | - | - |
| 2-20mm | - | 28.00 mm | - | - | - | - | - | - | - |
| 500t | - | - | - | - | - | - | - | - | 76 |
| 100% | - | 42.00 mm | - | - | - | - | - | - | - |
| 6208 | Nachi | 36.50 mm | - | - | - | - | - | - | - |
| 9 | - | - | - | - | - | - | - | - | 137 |
| 42109 | - | - | - | - | - | - | - | - | 240 |
| 700W | - | 37.00 mm | - | - | - | - | - | - | - |
| 6203ZZCM | koyo | 20.00 mm | - | - | - | - | - | - | - |
| LOT-5-SKF, | SKF | - | - | - | - | - | - | - | - |
| NU413-M1 | fag | - | - | - | - | - | - | - | - |
| B5 | - | - | - | - | - | - | - | - | 171 |
| BRD129MA | - | - | - | - | - | - | - | - | - |
| 12125-02-9 | - | 100 mm | - | - | - | - | - | - | - |
| 2pcs | - | - | - | - | - | - | - | - | 92.5 |
| RW63 | - | 50.00 mm | - | - | - | - | - | - | - |
| R140LC | - | 18.00 mm | - | - | - | - | - | - | - |
| 7x22x7mm | - | - | - | - | - | - | 4 | - | - |
| 99.5% | INA | - | - | - | - | - | - | - | 0.715 |
| sl183009 | INA | 18 mm | - | - | - | 50 mm | - | 5 mm | - |
| 10 | Parker | 71.40 mm | - | - | - | - | - | - | - |
| N21% | - | 5.00 mm | - | - | - | - | - | - | - |
| 10pcs | - | 74.00 mm | - | - | - | - | - | - | - |
| TSF (Flanged Cup Bearing) 484/472-B Tapered Roller Bearing 70.000×120.000×11.095mm | da:115; C0:269; d:105; ra:2; D_:160; SRE:8.67; r:2; LangID:1; DA_:16.669; SREX:0.065; |
| QJ1032 Four-point Contact Ball Bearing | Grease Speed Rating Open/Shielded n1:2700 rpm; Sealed Speed Rating n3:1900 rpm; Basic Dynamic Radial Load Rating C:203000 N; B:55.00 mm; Fillet Radius ra:3.00 mm; d:95.000 mm; Basic Static Radial Load Rating Co:173000 N; Oil Speed Rating Open/Shielded n2:3300 rpm; Accessories:One Shield & Snap-Ri; D:250.0000 mm; |
| T76 Tapered Roller Thrust Bearing 19.304x41.275x13.487mm | D:145.0000 mm; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:72000 N; Fillet Radius ra:1.50 mm; B:24.00 mm; Oil Speed Rating n2:4700 rpm; d:95.000 mm; Grease Speed Rating n1:0 rpm; Basic Dynamic Radial Load Rating C:71500 N; |
| BT4B332642/HA1 Four-row Tapered Roller Bearings | hidTable:ecat_NSANGB; r1:0.15; Oil rpm:24000; C0:12.5; fo:15.9; SREX:0.03; ALP21:15; SDM_:38.5; SBRG:19; SRE:2.48; |
| Tapered Roller Bearings 32232-A-N11CA | Accessories:One Shield; Basic Dynamic Radial Load Rating C:33200 N; Grease Speed Rating n1:7500 rpm; Oil Speed Rating Open/Shielded n2:9000 rpm; Fillet Radius ra:1.00 mm; D:85.0000 mm; Oil Speed Rating n2:9000 rpm; Basic Static Radial Load Rating Co:21600 N; Sealed Speed Rating n3:5000 rpm; d:45.000 mm; |
| HM259048/HM259010 Inch Taper Roller Bearing 317.5x447.675x85.725mm | d:85.000 mm; Sealed Speed Rating n3:2200 rpm; B:52.00 mm; Grease Speed Rating Open/Shielded n1:3200 rpm; Basic Dynamic Radial Load Rating C:174000 N; Accessories:Without Accessories; Basic Static Radial Load Rating Co:137000 N; D:210.0000 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; Fillet Radius ra:3.00 mm; |
| 33213,33213Q Bearing 65x120x41mm | yobi:2206K; SRI:4.17; ra:1; LangID:1; Prod_Type3:SABB_SA_TB; X0:1; Y0:1.7; PCD:46; X2:0.65; groove inner:38.048; |
| 352968 Taper Roller Bearing 340X460X160mm | Oil Speed Rating Open/Shielded n2:4500 rpm; Grease Speed Rating Open/Shielded n1:3700 rpm; d:80.000 mm; Basic Dynamic Radial Load Rating C:85800 N; Fillet Radius ra:2.00 mm; B:26.00 mm; Basic Static Radial Load Rating Co:86500 N; D:140.0000 mm; Accessories:Two Shields & Snap-R; |
| T126W Tapered Roller Thrust Bearing 32.004x55.562x15.875mm | D_:180; LangID:1; mass:3.47; KBRG:4152; rb:2; C0:305; da:111; Macha rpm:6300; DI_:119; yobi:NJ220ET7; |
| 99537/99102CD Tapered Roller Bearing 136.525x254.000x111.125mm | Prod_Type3:ACBB_SR_MM_DB; D_b:22.8; yobi:7901CTYNDB; SRI:1.65; GRS rpm:36000; SRE:1.65; SDM_:18; da:14.5; DI_:14.82; ALP21:15; |
| HM903244/HM903210 Inch Taper Roller Bearing 41.275x95.25x30.958mm | Category:Pillow Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:9.988; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:Concentric Collar; Housing Style:4 Bolt Pillow Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Expansion; Mounting Bolts:5/8 Inch; Relubricatable:Yes; Insert Part Number:22215; Seals:Triple Lip Urethane; |
| 3872/3820 Tapered Roller Bearing 34.925x85.725x30.162mm | Fillet Radius rb:0.040 in; Fillet Radius ra:0.08 in; Basic Static Radial Load Rating Co:46500 N; Basic Dynamic Radial Load Rating C:44900 N; Grease Speed Rating n1:5100 rpm; D:4.7500 in; d:3.250 in; B:0.7500 in; Oil Speed Rating n2:8000 rpm; |
| 30332 Taper Roller Bearing 160*340*75mm | D:440.0000 mm; Oil Speed Rating n2:1800 rpm; Grease Speed Rating n1:1400 rpm; B:72.00 mm; Basic Dynamic Radial Load Rating C:475000 N; Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:750000 N; d:240.000 mm; |
| T126 Taper Roller Bearing 32.004X55.562X15.875 Mm | C:1.65; D_:16; SDM_:10.677; C0:0.288; SRE:1.78; Oil rpm:40000; hidTable:ecat_NSMGNT; DE_:13.852; Prod_Type3:DGBB_MB_EN; r1:0.1; |
Okoume Plywood - BS 1088 Joubert Marine Grade | Marine
Buy Okoume plywood online. High quality Okoume marine grade plywood by Joubert. Meets BS 1088 and Lloyd's Register Type Approved. Shipped nationwide
Hydrotek, Meranti, Bs 1088 Rules 5 Ply 6mm x 4' x 8
Hydrotek Marine Plywood is manufactured utilizing BS 1088 specifications, it is a multiply type construction, with balanced internal plys and thick (1mm before
BS1088 Marine Ply | YBW Forum
Jun 20, 2007 - Having done a weeks worth of 'research' via the internet I am coming to the conclusion that the British Standard for Marine Ply (BS1088) isn't
Marine Plywood - Boulter Plywood
Okoume A/B BS1088 Lloyds Approved Quantity Discounts. Water & boil proof glue (WBP), Whole piece rotary cut face, Minimum 1.2mm face veneer thickness
BS 1088 (Hydrotek) – Midwest Boat Appeal & Marine Plywood
BS 1088 Hydrotek is a multi-ply marine plywood that is superior to all standard Meranti plywood currently produced. Both face and inner plies are constructed from whole piece, color matched, Meranti veneers. Hydrotek is used in boat building applications where only the best will do
meranti bs1088 hydrotek 6mm 5 ply marine grade plywood 4
Our BS 1088 is Lloyds certified, the BS 6566 version allows slightly thinner veneers and some filled end splits in the faces, but the same void free core and WBP
Okoume Marine Plywood: BS 1088 Quality - 3mm, 4mm, 6mm
4mm, 5/32", 13 lbs, 3, BS1088. 6mm, 1/4", 21 lbs, 5, BS1088. 9mm, 3/8", 31 lbs, 5, BS1088. 12mm, 1/2", 42 lbs, 7, BS1088. 18mm, 3/4", 62 lbs, 11, BS1088
BS 1088 - Wikipedia
In materials, BS 1088 is the British Standard specification for marine plywood that applies to plywood produced with untreated tropical hardwood veneers that have a set level of resistance to fungal attack. The plies are bonded with Weather Boil Proof (WBP) glue
32005J2, 32005 Bearing 25x47x15mm Video