| No. | Brand | B | T | H | s | F | r | b | C |
| (S20-N) | - | 18 mm | - | - | 1.6 mm | 32 mm | - | - | - |
| 61901 | SKF | 36.50 mm | - | - | - | - | - | - | - |
| 1220X2440mmx2.7mm-18mm | - | 70.00 mm | - | - | - | - | - | - | - |
| 6224C4 | SKF | 45.00 mm | - | - | - | - | - | - | - |
| PV140R1K1T1NTCB | Parker | 71.40 mm | - | - | - | - | - | - | - |
| Js200 | - | 1.25 Inch | 31.75 Millimeter | - | - | - | - | - | - | - |
| 7206BMU | Nachi | - | - | - | - | - | - | - | - |
| 12mm/15mm/18mm/20mm | - | - | - | - | - | - | - | - | - |
| PC200-6 | Komatsu | 56.00 mm | - | - | - | - | - | - | - |
| CAS7783-20-2 | - | 18.00 mm | - | - | - | - | - | - | - |
| 23096 | - | - | - | - | - | - | - | - | - |
| N46 | - | 9.00 mm | - | - | - | - | - | - | - |
| 1300X1100 | - | 28.00 mm | - | - | - | - | - | - | - |
| 18 | - | - | - | - | - | - | 1.5 | - | - |
| 3/4" | - | - | - | 16 mm | - | - | - | - | - |
| 18mm | INA | 34.90 mm | - | - | - | - | - | - | - |
| 630cc | - | - | - | - | - | - | - | - | 184 |
| PC200-6 | INA | - | - | - | - | - | - | - | 0.36 |
| 3023DCTNTG18 | RBC | - | - | - | - | - | 3 | - | - |
| 20W | - | 72.00 mm | - | - | - | - | - | - | - |
| N213ET2X | INA | - | - | - | - | - | 0.3 | - | 7.85 |
| 1/4" | Parker | 57.20 mm | - | - | - | - | - | - | - |
| BW2333 Taper Roller Bearing 95.25x.152.4x36.322mm | SRE:4.52; DI_:52.269; SREN:-0.02; C0:15.2; Z_:13; hidYobi:6009VV; SBRG:10; da min:50; D_:75; fo:15.3; |
| 33215 Tapered Roller Bearings 75X130X41MM | d:0.7500 in; radial dynamic load capacity:2150 lbf; D:2.8125 in; radial static load capacity:1080 lbf; B:3.5625 in; seal type:Contact with Flinger; bore type:Round; length through bore:0.866 in; duty type:Standard Duty; lubrication type:Lubrication Fitting; mounting type:Two-Bolt Flange; series:UELFL200; housing material:Cast Iron; replacement bearing:UE204-12; locking device:Accu-Loc; |
| 42688/42620 Bearing | d:70.000 mm; Accessories:Synthetic Rubber Sea; D:125.0000 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:62400 N; Grease Speed Rating Open/Shielded n1:5000 rpm; Basic Static Radial Load Rating Co:44000 N; B:39.69 mm; Sealed Speed Rating n3:3400 rpm; Oil Speed Rating Open/Shielded n2:6000 rpm; |
| EE134100/134144CD Tapered Roller Bearing 254.000x365.125x98.425mm | Distance JMAX:143.0 mm; Dimension N1:14.0 mm; Distance JMIN:129.0 mm; Shaft Diameter D:40 mm; Width A:48.0 mm; Dimension H2:20.0 mm; Weight W:0.86 kg; Height H:99.0 mm; Dimension A1:30.0 mm; Basic Static Radial Load Rating Co:19000 N; |
| 30202 Bearing | D:290.0000 mm; Basic Static Radial Load Rating Co:216000 N; Basic Dynamic Radial Load Rating C:195000 N; Grease Speed Rating Open/Shielded n1:2000 rpm; Fillet Radius ra:2.00 mm; B:46.00 mm; Accessories:One Shield; Oil Speed Rating Open/Shielded n2:2600 rpm; Sealed Speed Rating n3:1400 rpm; d:190.000 mm; |
| 352064 Tapered Roller Bearing 320x480x210mm | B1:5; SRI:1.12; GRS rpm:24000; hidTable:ecat_NSESBM; SREN:0; C0r:68; d:9; yobi:689DD; LangID:1; fo:15.114; |
| NA8575SW/8520CD Double Rows Taper Roller Bearing Chrome Steel Bearings | B:31 mm; s:2.1 mm; Pu:23.730 kN; E:mm; Static (Coa):196 kN; d2:75 mm; r1s (min):1.5 mm; D:130 mm; d2 (max):mm; Dynamic (Ca):162 kN; |
| 71433X/71750 Taper Roller Bearing 110x190.5x47.625mm | Oil Speed Rating Open/Shielded n2:13000 rpm; Grease Speed Rating Open/Shielded n1:10000 rpm; Sealed Speed Rating n3:7300 rpm; D:72.0000 mm; Basic Dynamic Radial Load Rating C:30700 N; Basic Static Radial Load Rating Co:15000 N; Fillet Radius ra:1.00 mm; d:20.000 mm; B:19.00 mm; Accessories:Two Shields; |
| H239640/H239612CD Tapered Roller Bearing 177.800x320.675x138.112mm | C0:29.7; D_:180; SRE:0; Y3:3.6; X0:1; cyl dia:17.462; da:111; CAng:6.577; PCD:140.5; C:69.5; |
| 33214U Tapered Roller Bearing 70x125x41mm | D:26.0000 mm; d:10.000 mm; Sealed Speed Rating n3:19000 rpm; Accessories:Two Shields; Oil Speed Rating Open/Shielded n2:36000 rpm; Fillet Radius ra:0.30 mm; Grease Speed Rating Open/Shielded n1:30000 rpm; Basic Static Radial Load Rating Co:1960 N; B:8.00 mm; Basic Dynamic Radial Load Rating C:4620 N; |
| EE275105/275156CD Tapered Roller Bearing 266.700x393.700x109.538mm | d:45; D_a max:92; dd min:66; DI_:58.5; da:53; db min:53; db max:56; Fw:58.5; C_conv:97500; TSR rpm:7100; |
| 32324 Tapered Roller Bearing | Angle Third:40 º; Basic Dynamic Radial Load Rating 40 AA Pair C1:390000 N; Basic Static Radial Load Rating 40 AA Pair Co1:490000 N; Grease Speed Rating n1:2200 rpm; Oil Speed Rating n2:3200 rpm; Basic Dynamic Radial Load Rating 15 B Bearing C2:199000 N; Fillet Radius ra:2.00 mm; d:120.000 mm; D:215.0000 mm; Fillet Radius rb:1.00 mm; |
| QJ230N2MPA Four-point Contact Ball Bearing | Basic Static Radial Load Rating Co:60000 N; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:5600 rpm; Oil Speed Rating n2:5600 rpm; D:140.0000 mm; Sealed Speed Rating n3:3200 rpm; Accessories:Two Shields & Snap-R; d:65.000 mm; B:33.00 mm; Grease Speed Rating n1:4800 rpm; |
| 382952 TAPERED ROLLER BEARING 260x360x265mm | Basic Dynamic Radial Load Rating C:22900 N; B:16.00 mm; Basic Static Radial Load Rating Co:17000 N; Oil Speed Rating Open/Shielded n2:11000 rpm; D:62.0000 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; d:30.000 mm; Accessories:Snap-Ring; |
Tapered Roller Bearings
Results 1 - 24 of 1000+ — Online shopping for Tapered - Roller Bearings from a great selection at Industrial & Scientific Store.
Tapered Roller Bearings - NSK
Bearings of this type use conical rollers guided by a back-face rib on the cone. These bearings are capable of taking high radial loads and axial loads in ...
Premium Conical Tapered Roller Bearings - NTN Americas
NTN tapered roller bearings are designed for the most demanding applications in industries such as mining, forestry and steel manufacturing.
Tapered roller bearings - features, benefits, applications ...
SKF Tapered roller bearings are ideal for supporting simultaneou radial and axial loads. They provide high reliability and long service life.
Tapered roller bearing - Wikipedia
A tapered roller bearing is a unit that consists of both tapered raceways (inner and outer rings), and tapered rollers. The construction is intended for ...Description · History · Applications
Taper Roller Bearings, Inc..
Taper Roller Bearings, Inc. offers made-to-order Class 3 precision bearings. Our carefully calibrated machines certify the bearings to ABMA Class 3 ...
Tapered Roller Bearings | The Timken Company
Single-row tapered roller bearings are the most basic and widely used, consisting of a cone assembly and a cup. Timken patented the first in 1898 and today ...
Tapered Roller Bearings - Large Diameter Tapered Bearings
Tapered roller bearings are used in a variety of industrial applications. The tapered rollers allow the bearings to accommodate heavy radial, ...
HM624749/HM624710 Tapered Roller Bearings Video