| 982751901 Liebherr R914HDSL Slewing Ring | D:90 mm; Oil:7 100 min-1; B1:mm; Static (Cor):29.870 kN; Grease:0.450 kN; B:23 mm; d:40 mm; rs Dynamic (Cr):1.5 mm; with cylindrical bore:8 400 min-1; Pu:9.810 kN; with tapered bore:1308 ; |
| 982855001 Liebherr R932 Li T Slewing Ring | P90°:113 kN; Max. speed for PosiTrac Plus seal:1300 r/min; h:60.325 mm; PosiTrac Plus contact element:2 x B10724-117; J max.:406.4 mm; L:466.725 mm; Housing:SAW 526; da:111.125 mm; J1:82.55 mm; Ca:89.789 mm; ba:65.881 mm; Cap bolt:2 x 1-8 UNC; P180°:84.5 kN; H2:60.325 mm; Da:230 mm; Mass pillow block:68 kg; Appropriate attachment bolt size G:0.875 in; Labyrinth ring:2 x LOR 116; H:295.275 mm; |
| 90205146 Liebherr R922 LC Slewing Ring | Oil Speed Rating n2:13000 rpm; Accessories:Two Shields & Snap-R; d:20.000 mm; Basic Dynamic Radial Load Rating C:20500 N; Sealed Speed Rating n3:9000 rpm; Grease Speed Rating n1:9000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:17000 N; D:47.0000 mm; B:20.60 mm; |
| 982720001 Liebherr R964 Slewing Ring | Basic Static Radial Load Rating Co:54000 N; Oil Speed Rating Open/Shielded n2:5300 rpm; Grease Speed Rating Open/Shielded n1:4500 rpm; Accessories:Snap-Ring; B:24.00 mm; D:145.0000 mm; Sealed Speed Rating n3:2800 rpm; Basic Dynamic Radial Load Rating C:63700 N; d:95.000 mm; Fillet Radius ra:1.50 mm; |
| 982853501 Liebherr R308 Slewing Ring | Ba min.:5 mm; Mass bearing + sleeve:0.39 kg; da max.:37 mm; K:2 mm; d1:25 mm; Da max.:56.4 mm; D1 ≈:53 mm; d3:45 mm; B1:31 mm; D:62 mm; Basic dynamic load rating C:66.1 kN; d2 ≈:37.6 mm; B4:8 mm; Fatigue load limit Pu:6.4 kN; Basic static load rating C0:60 kN; Reference speed:10000 r/min; Limiting speed:14000 r/min; ra max.:1 mm; Calculation factor Y0:2.2; db min.:33 mm; |
| 982736001 Liebherr R974B Slewing Ring | d:25.000 mm; Oil Speed Rating n2:11000 rpm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:8000 rpm; Basic Dynamic Radial Load Rating C:20800 N; Basic Static Radial Load Rating Co:14000 N; Accessories:Two Seals; B:20.60 mm; Sealed Speed Rating n3:8000 rpm; D:52.0000 mm; |
| 982751901 Liebherr R914STD Slewing Ring | D:52.0000 mm; Oil Speed Rating n2:12000 rpm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:8500 rpm; B:22.20 mm; Grease Speed Rating n1:8500 rpm; Basic Dynamic Radial Load Rating C:23800 N; Basic Static Radial Load Rating Co:20000 N; Accessories:One Seal & Snap-Ring; d:20.000 mm; |
| 90005811 Liebherr R904C Slewing Ring | d:70 mm; Bearing designation:3214 ; da:77 min; D:125 mm; Static (Cor):98.100 kN; Da:116 max; Weight:1.93 kg; Dynamic (Cr):87.349 kN; B:39.7 mm; Grease:3 200 min-1; Pu:4.459 kN; Oil:3 800 min-1; rs (min):1.5 mm; a:81 mm; ra:1.5 max; |
| 90005811 Liebherr A904C Li Slewing Ring | Basic Dynamic Radial Load Rating C:21200 N; d:30.000 mm; B:16.00 mm; Fillet Radius rb:0.60 mm; Fillet Radius ra:1.00 mm; D:62.0000 mm; Basic Static Radial Load Rating Co:12700 N; Grease Speed Rating n1:8500 rpm; Oil Speed Rating n2:12000 rpm; |
| 982853501 Liebherr A310 Slewing Ring | A1:15 mm; Limiting speed:800 r/min; Housing material:Cast iron; Recommended diameter for attachment bolts, mm G:16 mm; Housing:FY 510 M/VZ033; A:43 mm; Recommended diameter for attachment bolts, inch G:0.625 in; Db1:107 mm; A3:3.2 mm; N:18 mm; Da:125.4 mm; N4:4 mm; J6:129 mm; T:60.6 mm; Basic static load rating C0:23.2 kN; Thread grub screw G2:M10x1; Recommended tightening torque for grub screw:16.5 N·m; |
| 90020064 Liebherr LH22 M Slewing Ring | G:54.788 mm; B4:14.3 mm; B1:46.609 mm; d:55 mm; d3 max.:75.54 mm; Threads per inch:18; Sleeve:S 11x1.15/16; d1:49.212 mm; Mass adapter sleeve assembly:0.36 kg; Hydraulic nut:HMVC 11E; B:12.954 mm; |
| 90205146 Liebherr R922 NLC Slewing Ring | B:36.5 mm; Mass shaft washer:21.3 kg; r1,2 min.:5 mm; d1:360 mm; d:180 mm; |