3R6-79N9 Rotek Slewing Ring Bearings | Major Diameter B:2.360 in; Assembly Weight:6.2 lb; Piston Length of Travel:0.197 in; C:4.921 in; D:1.4960 in; E1:2.402 in; Piston Area:5.0 inĀ²; Threads No. per Inch:18; A:0.1970 in; E:3.701 in; |
161.20.0710.891.21.1503 Standard 5 Slewing Ring Bearings | Db (min):318 mm; Bore Type:Cylindrical Bore; r1:5 mm; Da (max):318 mm; Limiting Speed - Grease:1,800 rpm; D:340 mm; Configuration:Single Row; Limiting Speed - Oil:2,200 rpm; Dynamic Load Rating:825,000 N; ra1 (max):4 mm; Enclosure:Open; Radial Clearance:0.060 to 0.105 mm; d:130 mm; dc (min):187 mm; Db (max):287 mm; Fillet Radius/Chamfer:5 mm; da (min):152 mm; db (min):152 mm; Outside Ring Inside Diameter:285 mm; |
231.20.0400.013 Type 21/520.1 Standard 5 Slewing Ring Bearings | da (min):146 mm; d:140 mm; Radial Clearance:0.041 to 0.081 mm; Enclosure:Open; Static Load Rating:44,500 N; D:175 mm; Limiting Speed - Oil:4,000 rpm; B:18 mm; Factor fo:16.0; Configuration:Single Row; Dynamic Load Rating:38,000 N; Limiting Speed - Grease:3,400 rpm; Da (max):169 mm; Fillet Radius/Chamfer:1.1 mm; ra (max):1 mm; Weight:0.840 kg; Bore Type:Cylindrical Bore; |
60.25.0555.000.11.1504 Standard 5 Slewing Ring Bearings | Oil Lubrication - B/C/O Seal:600 rpm; Full Timken Part Number:QVPG22V100SB; Dimension D Min:11.88 in; Oil Lubrication - T Seal:1700 rpm; Pre Install Clearance Min:0.0053 in; Y1 - Geometry Factor:2.73; Housing Style:Four-Bolt Pillow Blo; Dimension A:4.92 in; Eng Internal Radial Clearance - Min:0.0053; Dimension H:1.75 in; Oil Lubrication - M/N Seal:900 rpm; Dimension F:16.13 in; Dimension C:5.5 in; |
161.20.0630.890.11.1503 Standard 5 Slewing Ring Bearings | Center Guidance:Fixed Inner Ring Rib; d:50 mm; da (min):61 mm; Nr. of Holes:4; Groove Width A:5 mm; Limiting Speed - Oil:8,250 rpm; Retainer Material:Machined Brass; Roller Profile:Asymmetric; Dynamic Load Rating:170,000 N; Axial Load Factor Y2:3.34; Axial Load Factor Y1:2.24; Bore Type:Tapered Bore; Hole Diameter (do):3 mm; Weight:1.360 kg; Radial Clearance:0.045 to 0.060 mm; Axial Load Factor Y0:2.19; |
R9-55N3 Rotek Slewing Ring Bearings | Da (max):65 mm; ra1 (max):0.6 mm; Dynamic Load Rating:61,500 N; r1:0.6 mm; Static Load Rating:65,000 N; dd (min):50 mm; Limiting Speed - Oil:10,000 rpm; B:23 mm; db (min):40 mm; D:72 mm; dc (min):46 mm; d:35 mm; Fillet Radius/Chamfer:1.1 mm; db (max):43 mm; Limiting Speed - Grease:8,500 rpm; Bore Type:Cylindrical Bore; Radial Clearance:0.045 to 0.070 mm; ra (max):1 mm; Enclosure:Open; Weight:0.446 kg; |
S16-112E1 Rotek Slewing Ring Bearings | D:160 mm; B:68.3 mm; Dx:172 mm; Dynamic Load Rating:178,000 N; Configuration:Double Row; a (max):4.9 mm; Groove Width:3.1 mm; Radial Clearance:0.025 to 0.051 mm; Limiting Speed - Oil:4,000 rpm; Cy:7.4 mm; Weight:5.510 kg; Fillet Radius/Chamfer:2.1 mm; Da:148 mm; d:75 mm; Groove Diameter:155.2 mm; ra:2 mm; Static Load Rating:149,000 N; Bore Type:Cylindrical Bore; da:87 mm; Enclosure:Open; |
61.20.0644.500.01.1503 Standard 5 Slewing Ring Bearings | Aa - Cage-Cone Backface Clearance:0 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2690 lbf; G2 - Heat Generation Factor (Rib-Roller End):12.4; C0 - Static Radial Rating:18800 lbf; D:73.025 mm; da - Cone Frontface Backing Diameter:38.61 mm; Bearing Weight:0.5 Kg; a - Effective Center Location3:-5.6 mm; B - Cone Width:23.813 mm; Cup Part Number:2821; K - Factor7:1.59; Ab - Cage-Cone Frontface Clearance:1.3 mm; |
S24-158E1 Rotek Slewing Ring Bearings | a - Effective Center Location4:-0.38 in; C0 - Static Radial Rating:28000 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:45300 lbf; Ab - Cage-Cone Frontface Clearance:0.06 in; db - Cone Backface Backing Diameter:2.13 in; G2 - Heat Generation Factor (Rib-Roller End):9.9; Aa - Cage-Cone Backface Clearance:0.03 in; Cage Type:Stamped Steel; Cg - Geometry Factor:0.0731; da - Cone Frontface Backing Diameter:1.85 in; |
3R6-71P9 Rotek Slewing Ring Bearings | Configuration:Single Row; B:102 mm; r1:4 mm; dc (min):182 mm; dd (min):198 mm; D:300 mm; Limiting Speed - Oil:2,200 rpm; ra1 (max):3 mm; db (min):158 mm; Fillet Radius/Chamfer:4 mm; Static Load Rating:1,380,000 N; Weight:35.900 kg; Radial Clearance:0.060 to 0.105 mm; Enclosure:Open; d:140 mm; ra (max):3 mm; Limiting Speed - Grease:1,800 rpm; Bore Type:Cylindrical Bore; db (max):176 mm; Dynamic Load Rating:1,020,000 N; |
231.21.0575.013 Type 21/650.1 Standard 5 Slewing Ring Bearings | K - Factor7:1.69; da - Cone Frontface Backing Diameter:584.96 mm; Series:LM377400; Cg - Geometry Factor:0.273; d:558.800 mm; Cup Part Number:LM377410; Cone Part Number:LM377449; Da - Cup Frontface Backing Diameter:710.20 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:88800 lbf; Db - Cup Backface Backing Diameter:695.96 mm; G1 - Heat Generation Factor (Roller-Raceway):9310; D:736.600 mm; |
M6-39P1Z Rotek Slewing Ring Bearings | Cage Type:Stamped Steel; Cone Part Number:EE420750D; Series:420000; Design Units:Imperial; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:432000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:44200 lbf; K - Factor7:1.45; da - Cone Frontface Backing Diameter:8.7 in; Ab - Cage-Cone Frontface Clearance:0.14 in; Cg - Geometry Factor9:0.145; R - Cone Frontface To Clear Radius2:0.130 in; |
No. | Brand | a | c | H | B | F | s | R | t |
161.20.0450.891.21.1503 | Standard 5 | - | - | - | 19 mm | - | - | - | - |
62.20.0630.001.21.1503 | Standard 5 | - | - | - | 58 mm | - | - | - | - |
M7-42P1Z | Rotek | - | - | - | - | - | - | - | - |
M7-39P1Z | Rotek | - | - | - | - | - | - | - | - |
232.20.0400.013 Type 21/520.2 | Standard 5 | - | - | - | 31 mm | - | - | - | - |
162.16.0450.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
M6-35P1Z | Rotek | - | - | - | 17 mm | - | - | - | - |
162.20.0450.890.11.1503 | Standard 5 | - | - | - | 21 mm | - | - | - | - |
60.20.0644.575.01.1403 | Standard 5 | - | - | - | 6.892 in | - | - | - | - |
L9-53N9Z | Rotek | - | - | - | 44.4 mm | - | - | - | - |
3R13-122N1B | Rotek | - | - | 134 mm | - | - | - | - | - |
61.20.0630.100.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
3R6-63N9 | Rotek | - | - | - | - | - | - | - | - |
230.20.0400.013 Type 21/520. | Standard 5 | - | - | - | - | - | - | - | - |
A20-95N4 | Rotek | - | - | - | - | - | - | - | - |
161.16.0400.890.11.1503 | Standard 5 | - | - | - | 21 mm | - | - | - | - |
61.20.0400.100.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
62.20.0644.500.01.1503 | Standard 5 | - | - | - | - | 108.00 mm | - | 647.7 mm | - |
62.20.0560.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
M5-38P1Z | Rotek | - | - | - | - | - | - | - | - |
3R8-98E9 | Rotek | - | - | - | 92 mm | - | - | - | - |
3R10-82E3C | Rotek | - | - | - | 27 mm | - | - | - | - |
250.15.0300.013 Type 13/4 | Standard 5 | - | - | - | - | - | - | - | - |
A18-89P1 | Rotek | - | - | - | - | - | - | - | - |
R9-63N3 | Rotek | - | - | - | - | - | - | - | - |
3R16-245N1 | Rotek | - | - | - | - | - | - | - | - |
61.20.0560.101.21.1503 | Standard 5 | - | - | 353 mm | - | - | - | - | - |
3R6-55E9 | Rotek | - | - | - | - | - | - | - | - |
250.15.0475.013 Type 13/5 | Standard 5 | - | - | - | - | - | - | - | - |
60.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings Video