| L9-57P9Z Rotek Slewing Ring Bearings | Weight:0.0017 Kg; Features:Shields; Bore Size d:4.000 mm; Outside Ring Width B:4.000 mm; Grease Limiting Speed:57000 rpm; Radius Rs min:0.150 mm; Outside Diameter D:11.000 mm; C0r - Static Load Rating:0.35 kN; Oil Limiting Speed:67000 rpm; Cr - Dynamic Load Rating:1 kN; |
| 3R8-79N9 Rotek Slewing Ring Bearings | Material :Cast Iron; N1:34 mm; A3:315 mm; Locating Rings (width x OD):SR300X10; J1:110 mm; C1 Dynamic Load Rating:1410; H1:180 mm; Max Oil Speed:1500; UPC Code:999999999; N:28 mm; Seal:TA36; Shaft Diameter d:160 mm; H:353 mm; Bearing:23136K; A:240.00 mm; G:M24; A1:190 mm; Cage Type:EJ; Bolt Qty:4; Seal Type:Taconite; |
| M6-39P1Z Rotek Slewing Ring Bearings | Cage Type:Stamped Steel; Cone Part Number:EE420750D; Series:420000; Design Units:Imperial; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:432000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:44200 lbf; K - Factor7:1.45; da - Cone Frontface Backing Diameter:8.7 in; Ab - Cage-Cone Frontface Clearance:0.14 in; Cg - Geometry Factor9:0.145; R - Cone Frontface To Clear Radius2:0.130 in; |
| 60.22.0370.301.11.1504 Standard 5 Slewing Ring Bearings | C1 - Dynamic Radial Rating (1 million revolutions)6:14100 lbf; Ab - Cage-Cone Frontface Clearance:0.1 in; a - Effective Center Location4:-0.03 in; d:2.2500 in; G2 - Heat Generation Factor (Rib-Roller End):38.5; da - Cone Frontface Backing Diameter:2.44 in; B - Cone Width:0.7188 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:6360 lbf; Series:L507900; C0 - Static Radial Rating:21500 lbf; |
| 3R8-59N2E Rotek Slewing Ring Bearings | Note:This product line wa; Support Type:Round Flange; Cr - Dynamic Load Rating:117800 lbf; Dimension L:7.7 in; Ca - Axial Load Rating:8183 lbf; Bearing Number:LSM175BR; Bolt Size:4 x M24; Seal Type:High Temperature Pac; Series Type:Light Series; Dimension N:14.375 in; Dimension R:17.2 in; Cor - Static Load Rating:186142 lbf; Shaft Size:175 mm; Dimension T:20.0 in; Dimension H:4.3 in; Dimension V:0.1 in; |
| 161.16.0400.890.11.1503 Standard 5 Slewing Ring Bearings | Factor fo:14.4; Configuration:Single Row; Fillet Radius/Chamfer:1.5 mm; D:100 mm; ra (max):1.5 mm; Static Load Rating:29,300 N; Bore Type:Cylindrical Bore; da (min):64 mm; Weight:0.607 kg; Dynamic Load Rating:43,500 N; Enclosure:Double Seal; B:21 mm; d:55 mm; Limiting Speed - Grease:4,300 rpm; Da (max):91 mm; Radial Clearance:0.008 to 0.028 mm; |
| M5-40P1Z Rotek Slewing Ring Bearings | B - Double Cone Width:5.1250 in; da - Cone Frontface Backing Diameter:11.56 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:51400 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:35400 lbf; K - Factor7:1.45; Cup Part Number:275155; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:345000 lbf; T - Bearing Width across Cups:5.1249 in; Y1 - ISO Factor9:1.68; Db - Cup Backface Backing Diameter:14.41 in; |
| 161.16.0400.891.21.1503 Standard 5 Slewing Ring Bearings | C - Cup Width:14.288 mm; Cage Type:Stamped Steel; Cone Part Number:15113; B - Cone Width:20.638 mm; Db - Cup Backface Backing Diameter:55.12 mm; Cg - Geometry Factor:0.0606; B:19.050 mm; Da - Cup Frontface Backing Diameter:58.42 mm; e - ISO Factor8:0.35; r - Cup Backface To Clear Radius2:1.27 mm; Series:15000; Cup Part Number:15245; Design Units:Imperial; R - Cone Backface To Clear Radius1:0.760 mm; |
| M5-38P1 Rotek Slewing Ring Bearings | da - Cone Frontface Backing Diameter:42.93 mm; Y - ISO Factor9:1.44; Db - Cup Backface Backing Diameter:55.88 mm; a - Effective Center Location3:-2.3 mm; R - Cone Backface To Clear Radius1:0.25 mm; db - Cone Backface Backing Diameter:42.93 mm; e - ISO Factor8:0.42; Cage Type:Stamped Steel; Cone Part Number:JL69349AX; Series:L69300; G2 - Heat Generation Factor (Rib-Roller End):13.6; G1 - Heat Generation Factor (Roller-Raceway):18.4; |
| 3R8-88N9 Rotek Slewing Ring Bearings | Ro:G1/8; Weight:246.00 Kg; Lockwasher and Lockplates:MS30/750; L1:356.00 mm; d1:710.00 mm; C:90 mm; e:8 mm; t:13 mm; D3:870 mm; Appropriate Hydraulic Nut:HMV150; G:Tr750x7; Locknut:HM30/750; C1:112.00 mm; |
| A22-129N1 Rotek Slewing Ring Bearings | Aa - Cage-Cone Backface Clearance:15.8 mm; C0 - Static Radial Rating:5310000 N; G1 - Heat Generation Factor (Roller-Raceway):3303.4; Series:32260; db - Cone Backface Backing Diameter:359 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:802000 N; C - Cup Width:115 mm; B:149 mm; Bearing Weight:139.93 Kg; e - ISO Factor8:0.43; Cg - Geometry Factor:0.212; Cone Part Number:X32260M; Cup Part Number:Y32260M; |
| A12-42E3 Rotek Slewing Ring Bearings | C0 - Static Radial Rating:1770 N; Bearing Weight:0.010 Kg; Ce - Dynamic Radial Rating1:3550 N; R - Inner Ring To Clear Radius2:0.3 mm; da - Inner Ring Backing Diameter:14.900 mm; d:12 mm; Cage Type:CR - Phenolic Outer; Ball Type:STEEL; D:24.000 mm; Limiting Speed (Oil):121000 rpm; r - Outer Ring To Clear Radius3:0.3 mm; Da - Outer Ring Backing Diameter:21.600 mm; Design Units:METRIC; Contact Angle:25 ยบ; |